-
DN80 AWWA/DIN Double Orifice Air Vent Valve manufacture
Shandong Ronborn Machinery Technology Co.,Ltd, with professional factory, is one of the leading China cast iron air valve manufacturers, we are able to offer you cheap cast iron air valve. Welcome to wholesale products from us.
Adapt to working conditions
1, adapt to the medium; water
2, suitable temperature: 0-80℃
3, nominal pressure: PN0.6Mpa, PN1.0Mpa, 1.6Mpa
4. When the nominal pressure is ≤1.0MPa, the ultimate failure pressure of all components is not less than 2.0MPa
When the nominal pressure is 1.6MPa, the ultimate failure pressure of all components is not less than 3.2MPa -
DN80 Micro Exhaust Air Vent Valve Manufacture
Shandong Ronborn Machinery Technology Co.,Ltd, with professional factory, is one of the leading China cast iron air relief valve manufacturers, we are able to offer you cheap cast iron air relief valve. Welcome to wholesale products from us.
-
Combined type Double Orifice Air Valve
Shandong Ronborn Machinery Technology Co.,Ltd, with professional factory, is one of the leading China cast iron air valve manufacturers, we are able to offer you cheap cast iron butterfly valve. Welcome to wholesale products from us.
Double orifice air valve that combines both large orifice & small orifice functions within one unit.The large orifice allows air to be expelled from the system during filling of a pipeline and admit air back into the system whenever sub-atmospheric pressure occurs.Air is vented from the system until water enters the valve and lifts the float against its seat,ensuring a tight seal.In the event of sub-atmospheric pressure in the system,the water level drops causing the float to fall from its seat and allow the admission of air.
Product application:
1. The product specification 50mm to 200mm can be used in the environment of clean water, raw water and seawater, and the working pressure is 1.0/1.6/2.5/4.0Mpa, which can meet the design of rapid mass exhaust, secondary trace exhaust, water hammer protection and sewage backflow.
2. The exhaust valve is a full flow funnel body channel type design with a large diameter circular floating body and a self-sealing rubber ring lined with alloy steel plate.SPECIFICATION: 1.DN:DN50-DN200 2.Design Standard:EN1074-4 3.PN:0.2-16bar 4.End Flange:BS4504/GB/T17241.6 5.Test:GB/T13927 6.Applicable Medium:Water 7.Temperature range:0-80°
